Biological clean bench

BFS Product

Filter Products

Recommended Products

Adjustable louvers with primary filter

Stainless steel washbasin

Clean Wardrobe

Clean studio

Tank HEPA

Biological clean bench

Your location：Home>Products>Biological clean bench

Product Name：Biological clean bench
Biological clean bench is a safe microorganism dedicated clean bench can also be widely used in biological laboratories, medical, pharmaceutical and other related industries, to improve the process conditions, protect the operator''s health,

13686042913

Ultra-clean bench described in detail：
Mainly used in daily work and field conditions require local clean sterile laboratory environment, while preventing the outside world with the experimental two-way pollution problems. Primary applications, advanced filtering materials entering the local environment of the experimental air filter, high-intensity UV on into and out of the local environment of air sterilization experiments, while the experimental local environment seal, guarantee a certain negative pressure.
Ultra clean Biosafety Workbench allows local clean sterile lab environment, while preventing external bidirectional and experimental environment pollution

This is a use of international advanced technology, the new manufacturing unidirectional flow clean bench, with adjustable fan system; with move up and down freely positionable sliding door; touch-type switching regulator voltage size, wind speed ensure the work area always in perfect condition.

1 Providing cleanliness rating of 100 operating environment for particle size≥0.5μmdust≤3.5Pcs / liter
2 Horizontal or vertical laminar flow laminar flow
3 Ultra-thin non-HEPA air filters, small footprint
4 Electronic touch-control panel, the fan flow can be adjusted to ensure that the work area wind speed is always in perfect condition
5 Stainless steel countertops, plexiglass enclosure can be equipped with an ultraviolet lamp remote control electrical interface

Ultra-clean bench Applications：
● Mainly used in electronics, biology, medicine, precision instruments and other industries of high cleanliness of the operating environment is a universal strong local air purification equipment

Ultra-clean bench environment and conditions：
Temperature: 5 ℃ ∽35 ℃；
Relative humidity: less than 85% (+ 35 ℃ when);
Atmospheric pressure: 86kPa∽106kPa;
Maximum dust concentration: 3500 / L (dust particle size of not less than 0.5 & micro; m, 1300 level);

Super-clean bench Structure：
Table by the chassis, high efficiency filter, variable air volume air supply units, several large pieces filter effect, work surfaces, eliminate electrostatic ion gun and other components. Chassis using a thin steel plate, the surface paint. Workspace countertops all stainless steel structure, movable countertop installation, easy to clean.
Workbench uses the direct control mode with fan switch, lighting switch, eliminate electrostatic ion switching, direct control of the device.

Clean Bench Principle: clean environment within a particular space, clean air (air intake filter) to set the direction of flow is formed. In the direction of air flow points, existing clean bench can be divided into vertical, from the inside out and sideways type formula. From the quality of operation and environmental impact to consider, to vertical than the superior. Plates supplied by supply clean air to a particular speed by operating the drop area, approximately in the middle region of the separate operation, after the air suction hole from the front window and the intake sucked and mixed in a rear lower portion of the operating area of the air sucked together by the blower is pumped to a positive pressure zone in the upper part of the machine, 30% through an exhaust gas discharged from the top of the filter plate, approximately 70% of the oxygen gas through the filter plate re-enters the operating area. To complement vent exhaust air, the same volume of air from the room air supplemented by operating port. The air will not enter the operating area, just form an air barrier.

Ultra-clean bench installation and adjustment：
1. Table should be placed in a clean room or a cleaner environment.
2. Workbench installation location should be away from sources of dust and source.
3. Unpacking table and place process, it should be handled with care, non-collision or inverted cross.
4. You should read this manual carefully before starting work.

The use of ultra-clean bench operation：
1. After the installation stage, please check again whether all parts of the normal is no different, until ready to start work, first with alcohol and other thorough cleaning.
2. Check the power plug into a power outlet is reliable.
3. Turn the power switch, the power indicator light, press the fan growth / deceleration key to start the fan is running, the wind
4. Do not place objects on top of the suction outlet or suction outlet, so as to avoid adverse impacts to reduce the amount of intake air and product performance.
5. When the high efficiency filter resistance is greater than 200Pa or less than 0.3m / sec high efficiency filter should be replaced at this time.

*注：可根据客户要求定做不同规格的洁净工作台。

Other Products Store

+More