
Lin Feng-transfer window, also known as purge pass box, clean room is a kind of auxiliary equipment, mainly for transferring small items between the clean area and clean area or clean area and non-clean areas to reduce the clean room open the door, the pollution clean area is reduced to a minimum. In order to reduce the cargo brought out a large number of dust particles, the wind leaching transfer window by HEPA filtered clean air after the injection nozzle can be rotated in all directions to the goods effectively and efficiently remove dust particles, dust particles after clearing then from the beginning. HEPA filter is recycled to the air shower area.
working principle:
Lin Feng-transfer window inside the air circulation is mainly used air through the primary filter, fans will quickly filter through the early effect of the air out, and then through the high efficiency filter unit into clean air, clean air from the ball in the high-speed spray nozzle, air flow rate up to 20M / S above, which can effectively remove surface quickly attached dust particles, dust laden air is sucked into the early effect of the filter.
三、Structural features:
Lin Feng-transfer window box can be color-coated steel and stainless steel structural forms, rigorous surface rust, phosphating after spray, it looks nice, and can be assembled on site after dismantling and more conducive to transport and to ensure product quality; high pressure fan with low noise and high efficiency fan relay control system used in combination, both to ensure the necessary wind speed, but also to save power consumption; high-speed ball-type nozzle arrangement scientific and reasonable, to ensure optimum air shower effect.
Wind leaching transfer window using HEPA filters, filtration efficiency: 99.99%, to ensure the purification level A-level use of EVA sealing material, sealed high performance;
Four nozzles: To reduce the cargo brought out a large number of dust particles, the wind leaching transfer window by HEPA filtered clean air after the injection nozzle can be rotated in all directions to the goods effectively and efficiently remove dust particles, Clear after the dust particles and then from the beginning, HEPA filter is recycled to the air shower area.

Short-range transfer window work tops, stainless steel, flat and smooth wear or cold paint selection and cost savings.

1, Pak Shing wind leaching transfer window to provide customized services.
2, Bedford transfer window containing different sizes customized services.
3, Bedford Sheng Different materials transfer window customization.
Precautions:
1, the transfer window is generally applicable to the transport vehicle, transit, to prevent rain, snow invasion, to avoid damage, corrosion
2, the transfer window should be stored at a temperature of -10 ℃ ~ + 40 ℃, relative humidity less than 80%, the Treasury no acid and other corrosive gases
3, out of the box, the job should be civilized, not a brutal, barbaric actions to avoid personal injury
4, out of the box, first make sure that the product whether the product set, and then the packing list carefully check for missing parts, the parts if there is no transportation damage caused by elephant.
installation method:
Select the appropriate wall at a convenient location, and then opening hole generally higher than the transfer window left and right large diameter 10MM, the transfer window into the wall, to maintain a balance fixed, with rounded corners, or other decorative pieces to decorate the transfer window and wall cracks, glue seal can be modified.
According to customer needs, customized non-standard sizes and floor-transfer window.
Production Environment

Product shipments:
